View EAIST3015A2_8975189.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 1 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com 1206 package chip infrared led with inner lens EAIST3015A2 features ? high reliability ? small double-end package ? peak wavelength p=850nm ? package in 8mm tape on 7? diameter reel ? low forward voltage ? pb free ? the product itself will remain within rohs compliant version. . ? compliance with eu reach descriptions . ? EAIST3015A2 is an infrared emitting diode in miniature smd package which is molded in a water clear plastic with flat top view lens. . ? the device is spectrally matched with silicon photodiode and phototransistor. applications ? pcb mounted infrared sensor ? infrared remote control units with high power requirement ? smoke detector ? infrared applied system device selection guide part category chip material resin color EAIST3015A2 gaalas water clear
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 2 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com package dimensions notes : 1.all dimensions are in millimeters notes : 2.tolerances unless dimensions 0.1mm notes : 3.suggested pad dimension is just for reference only. . please modify the pad dimension based on individual need.
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 3 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com absolute maximum ratings (ta=25
) parameter symbol rating units continuous forward current i f 65 ma reverse voltage v r 5 v operating temperature t opr -25 ~ +85
storage temperature t stg -40 ~ +85
soldering temperature *1 t sol 260
power dissipation at(or below) 25
free air temperature p d 130 mw notes: *1. soldering time 5 seconds. electro-optical characteristics (ta=25
) parameter symbol condition min. typ. max. units radiant intensity ie i f =20ma 1.0 2.0 40.0 mw/sr . i f =100ma pulse width 100 s ,duty 1% -- 10 -- peak wavelength p i f =20ma -- 850 -- nm spectral bandwidth ? i f =50ma -- 45 -- nm forward voltage v f i f =20ma -- 1.45 1.65 v . i f =100ma pulse width 100 s ,duty 1% -- 1.80 2.40 reverse current i r v r =5v -- -- 10 a view angle 2 1/2 i f =20ma -- 75 -- deg radiant intensity specifications for bin grading rank condition min. max. units g i f =20ma 1.25 2.25 mw/sr h 2.25 3.25 j 3.25 4.25 k 4.25 5.50 l 5.50 6.75 m 6.75 8.00 n1 8.00 40.00
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 4 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com 0 -25 0 40 20 60 100 80 790 0 20 40 60 80 100 890 850 810 830 870 930 910 950 i f =20ma ta=25 c typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distributio n ambient temperature fig.3 forward current vs. fig.4 relative intensity vs. . forward voltage . forward current
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 5 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com -20 0.6 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 20 10 typical electro-optical characteristics curves fig.5 relative radiant intensity vs. angular displacement
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 6 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (burn out will happen). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 10
~30
and 90%rh or less. 2.3 the leds suggested be used within one year. 2.4 after opening the package, the devices must be stored at 10c~30c and ? 60%rh, and used within 168 hours (floor life). if unused leds remain, it should be stored in moisture proof packages. 2.5 if the moisture absorbent material ( desiccant material) has faded or unopened bag has exceeded the shelf life or devices (out of bag) have exceeded the floor life, baking treatment is required. 2.6 if baking is required, refer to ipc/jedec j-std-033 for bake procedure or recommend the following conditions: 96 hours at 60c 5c and < 5 % rh (reeled/tubed/loose units) 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 7 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 8 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com package dimensions note : the tolerances unless mentioned is 0.1mm, unit: mm carrier taping dimensions: loaded quantity per reel 2000pcs/reel note : the tolerances unless mentioned is 0.1mm, unit: mm
lifecyclephase: revision : 2 expired period: forever release date:2015-12-22 17:47:28.0 data sheet 1206 package chip infrared led with inner lens EAIST3015A2 9 copyright ? 2015, everlight americas inc. all rights reserved. release date : 2015/12/17. issue no: 2 www.everlightamericas.com label form specification cpn: customer?s production number p/n : production number lot no: lot number qty: packing quantity hue: peak wavelength cat: ranks ref: reference msl-x: msl level made in: manufacture place notes 1. above specification may be changed without notice. everlight americas will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight americas inc. please don?t reproduce or cause anyone to reproduce them without everlight americas?s consent.

▲Up To Search▲

Price & Availability of EAIST3015A2

	To Download EAIST3015A2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .